FESTOOL



 





























































































































































































































































































































































































































   Festool    Router Accessories

CMS-GE Router Table Set


CMS GE Router Table

Product No 57000026 CMS-GE
$ 1,720.00

 




Parallel Edge Guide

Create grooves, flutes, dado, ploughs and rabbets in parallel to an edge with 1/256" (1/10 mm) fine-adjustment ability. Included dust extraction hood accepts standard 27 mm hose. (Includes guide rods, as pictured.)






Product No. 495182

Price $ 62.00


LR 32 Hole Drilling Set in Systainer

Includes: SYS 1 TL (497563), LR 32 Hole drilling set (583290), LR 32 Guide Rail Connector - 2 pieces (496938), Dowel Drill HW D 5 mm - for stopped holes (491066), Dowel Drill HW D 5 mm - for through holes (491064), Cup Hinge bit HW D 35 mm (491077), Festool FSZ 120 screw clamps (489570). Guide rail sold seperately.

Product No. 584100
Price $ 510.00



LR 32 Hole Drilling Set
for Trim Router

Includes: Lr 32 Guide Plate with mandrel (494340), two Side fences consisting of Edge Stop (495758) and Sliding Stop Flag (485759). Packaged in a box. Guide Rail, clamps and bits sold separately.




Product No. 583290
Price $ 256.00



0° Horizontal Base

Allows for the usage of bearing-less bits, and designed for straight routing. Features 1/256" (1/10 mm) adjustment.


Product No. 491427
Price $ 136.00




1.5° Horizontal Base

Allows for the usage of bearing-less bits, while providing a no-file edge. Includes base, bearing set, and dust hood.


Product No. 495165

Price $ 136.00



Side Stop

Set guide rails a specific distance from edge. Integrated ruler and adjustable stops. For use with the LR 32 system. Includes stop and sliding stop flag.


Product No. 485758
Price $ 74.00



Clamping Collet
for the OF 1010 EQ Router

1/4" (6.35 mm) collet with nut.



Product No. 488761
Price $ 36.00



Clamping Collet
for the OF 1010 EQ Router

8 mm collet with nut.


Product No. 488755
Price $ 36.00



LR 32 Guide Plate

Includes: Centering mandrel (485826). Guide Rail, clamps, bits, side fences sold separately.


Product No. 494340
Price $ 132.00



SYS-OF D8/12 Router Bit Systainer

Store, orgainze and transport up to 40 router bits. Holds 1/4", 8 mm and 1/2" bits. (Router bits not included.)

Product No. 497695
Price $ 94.00





Dowel Drill HW D 5 mm

Brad-point style bit for stopped holes for shelf pins and hardware installation.



Product No. 491066
Price $ 34.00





Dowel Drill HW D 5 mm

Spear-point bit for through holes for shelf pins or hardware installation.



Product No. 491064
Price $ 40.00




Cup Hinge Bit HW D 35 mm

Flat-bottom cutting bit for recessed cup-style hinges.





Product No. 491077
Price $ 86.00




LR 32 Guide Rail

55" (1400 mm) Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately. FS 1400/2 LR32.


Product No. 496939

Price $ 136.00




LR 32 Guide Rail

95-13/32" (2424 mm) Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately. FS 2424/2 LR32




Product No.
491622
Price $ 346.00



Routing Slide

Router carriage for multi-routing template. Router rides on carriage for routing cut-outs over large areas. MFS not included. (1 piece)






Product No. 495648

Price $ 172.00




LR 32 Guide Rail Connector

Accurately place shelf pin holes and European hardware based on the 32 mm system on taller workpieces or cabinets by joining rails. Also used aas a stop to set distance from end. (2 pieces)


Product No. 496938
Price $ 30.00



Plexiglas® Template

Mortis, groove, or slot an edge. Integrated ruler and adjustable fences accommodate material from 13/32" (10 mm) to 2-9/32" (50 mm).




Product No. 495246
Price $348.00

 

 

 

Festool



Template Guide Base

Unifrom base support surface with dust extraction channels for use with template guide bushings. For use with the OF 2000 EB Router.

Product No. 494675
Price $ 62.00



Small Bore Base OF 1400

Unifrom base support surface with dust extraction channels for use with template guide bushings. For use with the OF 1400 EQ Router.



Product No. 492574
Price $ 52.00



Small Bore Base

Unifrom base support surface with dust extraction channels for use with template guide bushings. For use with the OF 2200 EB Router.








Product No. 494677
Price $ 62.00



Table Widener

Oversized, heavy-duty base plate with integrated rotating chip catcher. Increased hole-diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface. For the OF 1400 EQ Router.



Product No. 493233
Price $ 86.00



Table Widener

Oversized, heavy-duty base plate with integrated rotating chip catcher. Increased hole-diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface. For the OF 2200 EB Router.


Product No. 494682
Price $ 96.00





Guide Rail Base Kit

Includes guide stop and accessory offset base plate for use with OF 2200 and FS guide rails. Guide Rods not included.





Product No.494681

Price $ 132.00






Guide Rods

Attach Edge Guides or Guide Stops to routers (2 pieces) For use with the OF 2200 EB router.




Product No. 495247
Price $ 29.00



Edge Guide
for the OF 1010 EQ

Create groove, flutes, dados, ploughs and rabbets by accurately guiding a router from an edge. Includes Dust Hood (489565). Does not include Guide Rods (489565).


Product No. 489427
Price $ 46.00



Edge Guide
for the OF 1400 EQ

Create groove, flutes, dados, ploughs and rabbets by accurately guiding a router from an edge. Includes Dust Hood (489565). Does not include Guide Rods (463147).



Product No. 492636
Price $ 84.00



Edge Guide
for the OF 2200 EB

Create groove, flutes, dados, ploughs and rabbets by accurately guiding a router from an edge. Includes Dust Hood (489565). Does not include Guide Rods (495247).


Product No. 494680
Price $ 96.00



Fine Adjuster for Edge Stop

Quick and precise adjustment when using router with Guide Stop (488752) or edging plate. Allows for 1/256" (1/10 mm) fine adjustment.




Product No. 488754
Price $ 29.00





Fine Adjuster for Edge Guide

Attaches to Edge Guide to provide lateral mico-adjust to 1/256" (1/10 mm). Edge Guide not included.




Product No. 483358
Price $ 29.00




Guide Stop
for the OF 1010 EQ Router

Adapt routers to guide rails for perfectly guided cuts. Slot in base engages rib on guide rail.


Product No. 488752

Price $ 44.00



Guide Stop
for the OF 1400 EQ Router

Adapt routers to guide rails for perfectly guided cuts. Slot in base engages rib on guide rail.



Product No. 492601
Price $ 56.00



Extension Table
for the OF 1010 EQ Router

Extends support area for edge trimming. Small center bore facilitates edge and corner routing. Outrigger handle for additional support.





Product No. 488756

Price $ 58.00




Hard Fiber Base Runner

Customize the solid base piece hole diameter with a plunge bit to meet your needs. Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits, especially for greater support on outside corners. Does not have the center bore.


Product No. 489229

Price $ 29.00




Dust Extraction Hood
for the OF 1400 EQ

Auxillary dust extraction hood for use with the VS 600 Dovetail Jig. Captures dust and Chips from outside and below the template.







Product No. 484453
Price $ 29.00



Dust Extraction Hood
for the OF 2200 EB

Auxillary dust extraction hood for use with the VS 600 Dovetail Jig. Captures dust and Chips from outside and below the template.





Product No. 492585
Price $ 40.00



Support
for the OF Routers

Provides support to the OF routers when used with the guide rail. Attaches to base and is fully adjustable. Features graduations for measuring bit diameter and setting points for stopped cuts.

Product No. 438608
Price $ 6.00



Trammel Unit

Route circles and decorative curves up to 29-7/8" (760 mm) in diameter.








Product No. 483922

Price $ 29.00



Angle Arm
for the OF 1010 EQ

Used with copier scanning set to copy workpieces. Used with edging plate for timming edges flush. Copier set and eding plate sold separately.





Product No. 486052

Price $ 52.00



Copier Scanning Set

Includes shaft and 3 scanning rollers. Attaches to angle arm to copy workpieces and patterns. Scanning roller follows contours and guides cutter.

Fits OF 1010 and 1400


Product No. 486534

Price $ 74.00



Edging Plate

Orients router horizontally for flush trimming operations. Allows the OF 1010 and 100 to trim edge banding.






Product No. 486058

Price $ 68.00



Chip Deflector

Used with edging plate to deflect cihps into dust extraction hood.



Product No. 486242
Price $ 29.00



Clamping Collet
for the OF 1400 EQ Router

1/4" (6.35 mm) collet with nut.

Product No. 494463
Price $ 46.00



Clamping Collet
for the OF 1400 EQ Router

3/8" collet with nut.


Product No. 494464
Price $ 46.00



Clamping Collet
for the OF 1400 EQ Router

8 mm collet with nut.


Product No. 494460
Price $ 46.00



Clamping Collet
for the OF 1400 EQ Router

1/2" collet with nut.

Product No. 494465
Price $ 46.00




Template Guide
for the OF 1010 EQ Router

10.8 mm OD / 9 mm ID



Product No. 486029

Price $ 17.00




Template Guide
for the OF 1010 EQ Router

13.8 mm OD / 11 mm ID


Product No. 484176

Price $ 17.00



Template Guide
for the OF 1010 EQ Router

17 mm OD / 15 mm ID

Product No. 486030
Price $ 17.00



Template Guide
for the OF 1010 EQ Router

24 mm OD / 21 mm ID


Product No. 486031
Price $ 17.00



Template Guide
for the OF 1010 EQ Router

27 mm OD / 25 mm ID



Product No. 486032

Price $ 17.00



Template Guide
for the OF 1010 EQ Router

30 mm OD / 27 mm ID


Product No. 486033

Price $ 17.00



Template Guide
for the OF 1010 EQ Router

40 mm OD / 37 mm ID



Product No. 486034

Price $ 17.00



Template Guide
for the OF 1400 EQ Router

24 mm OD / 21 mm ID


Product No. 492183
Price $ 17.00



Template Guide
for the OF 1400 EQ Router

27 mm OD / 25 mm ID

Product No. 492184
Price $ 17.00



Template Guide
for the OF 1400 EQ Router

30 mm OD / 27 mm ID


Product No.492185
Price $ 17.00



Template Guide
for the OF 1400 EQ Router

40 mm OD / 37 mm ID


Product No. 492186
Price $17.00



Template Guide
for the OF 2200 EB Router

17 mm OD / 15 mm ID

Product No. 494622
Price $ 20.00



Template Guide
for the OF 2200 EB Router

24 mm OD / 21 mm ID


Product No. 494623
Price $ 20.00



Template Guide
for the OF 2200 EB Router

27 mm OD / 25 mm ID



Product No. 494624
Price $ 20.00



Template Guide
for the OF 2200 EB Router

30 mm OD / 27 mm ID


Product No. 494625
Price $ 20.00



Template Guide
for the OF 2200 EB Router

40 mm OD / 37 mm ID



Product No. 494626
Price $ 20.00



Imperial Template Guides
for the OF 2200 EB Router

1/2" OD 13/32" ID




Product No. 495339
Price $ 20.00



Imperial Template Guides
for the OF 2200 EB Router

3/4" OD / 21/32" ID


Product No. 495340
Price $ 20.00



Imperial Template Guides
for the OF 2200 EB Router

1" OD / 29/32" ID




Product No. 495341
Price $ 20.00



Imperial Template Guides
for the OF 2200 EB Router

1-2/8" OD / 1-1/4" ID





Product No. 495342
Price $ 20.00



Guide Bushing Adapter
for the OF 1010 EQ Router

Accepts industry standard two-piece threaded guide bushings. OF 1010 version is non metallic.

Product No. 469625
Price $ 26.00



Guide Bushing Adapter
for the OF 1400 EQ Router

Accepts industry standard two-piece threaded guide bushings.



Product No. 493566
Price $ 26.00



Guide Bushing Adapter
for the OF 2200 EB Router

Accepts industry standard two-piece threaded guide bushings.






Product No. 494627
Price $ 30.00



Centering Mandrel

Center guide busing and the LR 32 plate to the collet for accurate routing results. Works with 1/4" and 8 mm collets.




Product No. 492187
Price $ 34.00



HW Two Flute
Edge Trimming Cutter

For horizontal base.

Shank: 8mm
Cutter diameter: 3/4" (19 mm)
Working length: 5/8" (16 mm)
Total length of bit: 1-13/16" (46 mm)


Product No. 491666

Price $ 52.00

 




Chamfer/Edge Trimming Bits

For vertical base.

Shank: 8mm
Cutter diameter: 15/16" (24 mm)
Working length: 7/16" (11 mm)
Total length of bit: 2-1/8" (54 mm)
45° Chamfering Angle






Product No. 491026
Price $ 64.00



OF 2200 Accessory Kit
Imperial

Kit provides and organized system to store and stransport all of OF 2200 accessories. Fully stocked set includes Parallel Edge Guides, Guide Stop, Guide Rods, Table Widener Base, Small Bore Base, Template Guide Base, Offset Base for Guide Rail and Template Guide Bushings.

Product No. 497656
Price $ 400.00



OF 2200 Accessory Kit
Metric

Kit provides and organized system to store and stransport all of OF 2200 accessories. Fully stocked set includes Parallel Edge Guides, Guide Stop, Guide Rods, Table Widener Base, Small Bore Base, Template Guide Base, Offset Base for Guide Rail and Template Guide Bushings.




Product No. 497655
Price $ 400.00